Water Based Rust Converter

As part of their range of products for rust control and prevention, Natech have developed a water based, brush on, reactive primer for steel. Products can be applied and left without further treatment, or overcoated for added protection and aesthetics.

FERPRIME Rust converter

Ferprime rust converter is  a reactive, water based, low VOC resin primer for Iron and Steel.  Converting existing rust into an inert corrosion resistant black coating. Formulated with cutting edge corrosion inhibition technologies to prevent any further corrosion below the primer layer.

FerPrime can be applied to a wide range of surfaces and will provide a solid rust preventing primer to non rusted iron surfaces.

As a Primer FerPrime can be easily over-painted with a wide range of paint types applied via brush, roller or spray.

Usage Instructions:

Remove any loose rust and corrosion by brushing with a wire brush.

Apply FerPrime  by paint brush. 1 Litre of FerPrime will cover approximately 8 square metres, depending on the surface being treated.

Allow to air dry. This takes approximately 10-15 minutes at an average temperature of 20 degrees Celsius.

1 coating thickness is between 20 – 30 microns.

Please Note: To avoid product drying out please ensure that you replace the lid after use.


Natech Limited,

Unit 2, Ring Road,  Zone 2, Burntwood Business Park,  Burntwood,  Staffordshire,  WS7 3JQ,  United Kingdom